Differential and Prop shaft final fitting

I managed to pick up a Haynes manual for a Sierra on E-Bay for 1p plus postage.

It defines the torque settings to be as follows:
      Diff side bolts: 60nm plus locktite
      Diff long bolts: 80nm
      Propshaft to diff bolts: 60nm plus locktite
I have also tightened the diff stabilisation bolt to 50nm


So I know where I have been with the torque wrench I have added a spot of red paint on each tightened bolt

Leave a Reply

Your email address will not be published. Required fields are marked *