 |
Passengers Door
Having already removed the drivers door I assumed that the same procedure would be required – I was almost right. My small garage ddidn’t allow the passenger door to open completely so the simply practice of removing the screws holding the door car crome plate was impossible with any of my standard screwdrivers. So I had to adapt and create my own tool.
Other than that it came off without too much effort. I am a little concerned as to how it’s going to go back on. The wiring for the remote locking is in such a tricky place behid the window.
The dorr card is is fairly good condition when compared to the drivers side. Don’t think I will need to replace the card itself on this side.
Passengers Seat
No problems here. The screws holding the seat rails came straight out. The seat however has seen better days.
