 |
With other things going on, it’s been a few months since I disassebled the mower. Over this time I have found a few hours here and there to rub-down and re-spray each of the panels. Now, they are all wrapped in bubblewrap in a big box in the garage.
Having broken up from work early this Christams, I thought I would start the re-assembly process as I have a little time, even though it is a miserable 3 degrees and foggy outside.
I posted a copy of the maintenance manual in a previous post – this is pretty much it when it comes to information. It’s the exploded diagrams I will start with and try to remember which washers went where.
Here is the basic construction with the bearings on the blade shaft re-greased along with the cylinder coupling sprocket.
